Hot New Products Digital Power Sequencer Dante DSP Audio Processor
4CH Dante Audio Interface
Main Features:
- Support PoE power supply and DC12V dual power supply
- Built-in Dante module
- 4 balanced inputs + 4 balanced outputs
- The input supports 48V phantom power supply
- DSP processing functions include gain adjustment, 5 - stage
parameter equalization, compressor,.Mixer, 15 graphic equalization,
limiter, setting, etc
- Provide Windows platform /PAD client software
- Support PoE power supply and DC12V dual power supply
- Built-in Dante module
- 4 balanced inputs + 4 balanced outputs
- The input supports 48V phantom power supply
- DSP processing functions include gain adjustment, 5 - stage
parameter equalization, compressor,.Mixer, 15 graphic equalization,
limiter, setting, etc
- Provide Windows platform /PAD client software
Specification:
| Model No. | DB0404-C | | Dante Interface | 2 | | Simulated maximum gain | -6～36dB,6dB each,tota 7 level | | Digitalizing bit | 24bit | | Sampling Rate | 48k | | Frequency Response (20~20KHz) | ±0.2dB | | Phantom power (per input) | 48V | | Maximum level (input/output) | +10dBu /+14dBu,balance | | Total harmonic distortion + noise | ≦0.005% @4dBu | | Noise floor (A- weight) | -88dBu | | Input impedance (balance-type) | 20KΩ | | Output impedance (balance-type) | 100Ω | | System delay | 1ms | | Channel isolation @1kHz | 100dB | | Working Power Supply | DC 12V & PoE | | Working Temperature | -10-50℃ | | Size | 142X157*46mm |
|
Software:
Our designed PC version control software is the best tool for you
to monitor and operate the digital audio processor, which can be
used to edit and store scenes (such as meeting mode, artistic
performance mode, concert mode, etc.) according to the acoustic
characteristics of different functions. The system built-in lock
screen function, It can effectively avoid the occurrence of wrong
operation.
Use and operation steps:
1) Please connect according to the prompts in the interface
instructions. The device supports 12V DC and PoE power supply.
First Way:Prepare the POE switch and network cable,When the POE
switch is normally powered on, connect the "Dante & POE" interface
and the POE switch with the network cable, and check that the power
indicator on the panel is on；Wait about 3 seconds, and the device
screen displays the device IP address information.
Second Way:Connect 220V AC power supply and interface box with 12V
DC power adapter. After 220V AC power is powered on, check the
power indicator light on the panel; After waiting for about 3
seconds, the device screen displays the device's IP address.
Note: 12V DC power supply and PoE power supply cannot be used
simultaneously.
2)In the Dante audio network, the Dante Controller software is
required to route the signals that connect to the network. It
implements one-to-one, one-to-many mapping of inputs to outputs
within the Dante network.
Note: the Dante Controller software is available on Windows 7,
Windows 10, Mac OS, and OS X10. Please select the appropriate
version according to your system platform
3)Use Sound Tune software (built-in processor) to adjust the
parameters of audio signals. After the device is connected to the
local area network, open the PC software and click the "Search
Device" button in the lower left corner. The IP address of the same
type of device online will be displayed. Device default Dante
dynamic IP; Username: admin; Password: 123456
Check Products one by one, to make sure all products are working
excellent quality..
