Professional Audio System 12X12 Dante Media processor Dante Digital
Audio Processor with dsp
Main Features:
- USB Background music playback and recording function
- Support mobile phone, tablet control and distributed cloud control
- DSP audio processing, built-in automatic mixer, feedback
elimination(AFC), echo elimination(AEC), noise elimination (ANC)
function
- Input per channel:Front stage amplifier, signal generator,
expander, compressor, 5 stage parameter equalization
- Output per channel:31 Section diagram equalizer, delay device,
frequency divider, limiter
- Full function matrix remix
- Built-in automatic camera tracking function
- Support for scenario presets；
- Automatic memory protection when power off
- 1U Whole aluminum chassis
- Built in Dante Module
Description:
The MX-0808D audio processor is a freely designed audio processing
and control system.It adopts advanced DSP processing technology,
has a new automatic mixing, Feedback elimination, etc, targeted to
solve various practical problems in the application scene.
Specification:
| Model No. | MX-1212D | | DSP Processing | Ti 456MHz FLOPS DSP | | Number of analog channels | 12 Input + 12Output | | Number of Dante channels | 12 Input + 12 Output | | Core Algorithm | Automatic mixing, feedback elimination(AFC), echo elimination(AEC),
noise elimination(ANC) | | GPIO | 8 ( Including input and output) | | RS232/RS485 | 1 | | RJ45 control interface | 1 | | USB Port | 1 | | RJ11 phone interface | 0 | | DANTE network interface | 2 | | Simulated maximum gain | 51dB | | Digitalizing bit | 24bit | | Sampling Rate | 48k | | Frequency Response(20~20KHz) | ±0.2dB | | Analog-to-digital dynamic range (A-weighted) | 114dB | | Digital-to-analog dynamic range (A-weighted) | 120dB | | Input to output dynamic range | 108dB | | Total harmonic distortion + noise | ＜0.003% @1KHz ,4dBu | | Floor noise (A- weighted) | -90dBu | | Delay storage | 2s | | Analog input to output system delay | 3ms | | Input impedance (balance -type) | 20KΩ | | Output impedance (balance -type) | 100Ω | | Maximum Input
Level | +18dBu,balance | | Maximum Output Level | +18dBu,balance | | Equivalent input noise EIN(20-20kHz,A-weighted). | ≤-131dBU | | Phantom power (per input) | 48V | | Input common mode rejection,60Hz | 70dB | | Channel Isolation,1kHz | 104dB | | Dimensions (W*D*H) | 482*258*45(mm) | | Weight | 3Kg | | Power Consumption | <40W | | Operating
Temperature | -10 - 50℃ | | Working Power
Supply | AC110V-220V,50Hz/60Hz |
|
Devices Overview:
Front Panel:
Switch on the power and turn it on. When the power indicator lights
up, wait for the SYS status indicator to enter the flashing state,
then the equipment starts and completes
①PWR: power light.
②SYS: system status light. The green light flashes after the device
is started
③USB: storage devices.( Support MP3 and WAV format U disk recording
and broadcasting)
Back Panel:
① Ground screw: The internal circuit of the equipment is grounded
through this screw
② POWER interface: connect the 100~220V AC power supply, and a
rocker switch.
③ Network control interface: debug and monitor the device by
connecting to the network port.
④ RESET: Long press the reset button to restore factory Settings
and restart the processor
⑤ RS232+ RS485+GPIO Control Interface: Connect control terminal or
central control device to send and receive control command.
⑥ Dante network interface: For accessing Dante audio networks
⑦ Signal output interface: connection amplifier, active speaker and
other equipment.
⑧ Signal input interface: connect the microphone, DVD and other
equipment.
Company Introduction:
FHB Audio was established in 2018,who is a technology-based
enterprise integrating design, research and development,
production, sales, and service, specializing in the production of
digital signal processor, digital conference system, Dante products
line, microphones, Digital Mixer, power amplifier etc., also can
provide customers with a series of according to their requirements,
mainly for conference, education, hotels and other application.
The company has strong R&D technical strength and advanced
production equipment, and has a complete product quality control
system. From raw material input to cost delivery, all links are
tested and quality tracked, so as to ensure reliable and stable
quality.
Through unremitting efforts, the scale of FHB has continued to
expand, and our company has gathered a group of high-quality,
first-class audio technology professionals. So far, our team has
more than 100 employees, the product line has increased to 3, and
the business is sold all over the world. and have obtained CE, ROHS
certificates.
FHB always adheres to the business tenet of "honesty-based", and
pursues excellent quality, and constantly improves product quality
and after-sales service system to achieve a win-win situation
.
